Climate
For crop growth during the kharif season, a relative humidity of 80–85% and average rainfall of 500–750 mm are suitable. The optimum ideal temperature for good growth in kharif is 33–34°C, whereas during rabi a temperature above 24–25°C is suitable. For good germination, the optimum soil temperature is 18–21°C.
Soil
Level land with good drainage is preferred. Well-drained loam, sandy loam, light to medium black soils are suitable. For good plant growth, a soil pH of 6.5 to 7.5 is ideal.
Field Preparation and Sowing
After one summer ploughing, 2–3 harrowings followed by planking are required to make the soil friable and clod-free.
Time of Sowing
Sowing time depends on soil temperature, weather parameters, and harvest planning. However, for summer, 20 March to 10 April is the best period, and for the monsoon season sowing should be done with the first rainfall. Sowing of multi-cut varieties/hybrids should be completed in the first fortnight of April. Depending on land condition and irrigation availability, sowing can be extended up to the first week of May. Multi-cut varieties/hybrids can be grown as a summer crop under irrigation.
Seed Rate and Seed Treatment
Multi-cut fodder sorghum: seed rate is 10 kg/ha, row spacing 45 cm, with irrigation as required or at intervals of 7–10 days during summer.
Method of Sowing
Seeds should be sown in rows at a spacing of 25–30 cm and at a depth of 2.5–4.0 cm for proper germination. If the field is not prepared in time, the seed rate should be increased by 15–20% and sowing can be done by broadcasting.
Fertilizer and Nutrient Management
As sorghum is a grain as well as high biomass crop, balanced fertilization is required for high yield. In multi-cut varieties, 100–120 kg nitrogen/ha is recommended in three splits: one-third at sowing, one-third after the first cut, and the remaining one-third after the second cut. All splits should be applied when adequate soil moisture is available. In poor light soils, 8–10 t/ha of compost or farmyard manure should be applied before sowing.
For multi-cut sorghum, apply 10–15 t/ha of compost/FYM before sowing and (except for the last cut) apply 40–45 kg nitrogen/ha after each cut in equal splits.
Water Management
Generally, sorghum sown during the rainy season does not require irrigation. During prolonged dry spells or if required, one or two irrigations may be given at intervals of 15–20 days. Waterlogging should be avoided. For crops sown in March or April, the first irrigation should be given 15–20 days after sowing, followed by irrigations at 10–15 day intervals. In multi-cut varieties, irrigation should be given immediately after each cut to ensure better regeneration and rapid growth.
Weed Management
The field should be kept weed-free for the first 25–30 days after sowing. Purple nut sedge (Cyperus rotundus), Bermuda grass (Cynodon dactylon), and other broad-leaved weeds are common. Weeds compete for water and nutrients, especially during early crop growth stages. Well-prepared land, optimum seed rate, and good germination generally suppress early weed emergence; later, crop canopy prevents weed survival. Summer ploughing and 1–2 hand weedings at 15–20 days after sowing significantly reduce weeds. Pre-emergence application of atrazine @ 0.5 kg active ingredient/ha effectively controls weeds. Herbicide should be sprayed within 48 hours after sowing, ensuring the soil surface is moist. For integrated weed management, summer ploughing, good land preparation, 1–2 weedings, and use of optimum seed rate with high germination seeds are essential.
Insect Pests and Diseases and Their Management
Foliar sprays and systemic chemicals should be avoided, as the whole plant is used as fodder during flowering or cutting stages. Symptoms and management are as follows:
Insect Pests
Shoot fly
Symptoms: Occurs at seedling stage; central leaf wilts and dries; tunneling in the peduncle; typical “dead heart” symptom. Damaged plants produce side tillers and increase infestation.
Management: Sowing from late September to the first week of October; release of parasitoid Trichogramma chilonis eggs @ 12.5 lakh/ha.
Stem borer
Symptoms: Attacks crop from the second week after germination; irregular holes on leaves; mixture of perforations and scratches due to feeding on epidermis; sometimes “dead heart” in young plants.
Management: Uproot and burn stubbles; remove stems/stubbles to prevent carryover to the next crop.
Fall armyworm
Symptoms: First and second instar larvae scrape the upper epidermis of leaves, giving a skeletonized appearance; third instar forms marginal holes; fifth instar feeds voraciously with 1–2 larvae per whorl.
Management: Deep ploughing before sowing to expose pupae and larvae to sunlight and natural enemies; collect and destroy egg masses/larvae; install pheromone traps @ 12 traps/ha after sowing; set up bird perches @ 25/ha.
Diseases
Panicle disease / Grain mold
Symptoms: Pink, white, grey, or black fungal growth develops on infected grains.
Management: Avoid varieties prone to maturation during high rainfall; harvest panicles immediately after maturity; spray propiconazole 0.2% a.i. or apply biocontrol Trichoderma harzianum liquid broth @ 10 ml/l water on panicles to reduce mold and obtain clean grain.
Ergot / Sugary disease
Symptoms: Sticky sugary droplets exude from flowers.
Management: Ensure synchrony of flowering (A and R lines) in seed production plots; early sowing; remove collateral hosts from field bunds; mechanically remove sclerotia from seed.
Leaf disease – Anthracnose
Symptoms: Small brown to dark brown circular to elongated lesions with black dots on leaf blade, midrib, and petiole.
Management: Use clean seed; destroy plant residues; practice crop rotation; remove alternate host weeds such as Sudan grass and Johnson grass.
Downy mildew
Symptoms: Bright green and white streaks on leaves; white patches of oospores; leaves may become chlorotic and plants often fail to produce panicles.
Management: Deep ploughing before planting to destroy oospores; uproot and burn infected plants; follow crop rotation; seed treatment with metalaxyl/ridomil 25 @ 1 g a.i./kg seed.
Rust
Symptoms: Ruptured pustules on leaves releasing red to brown powdery masses.
Management: Use clean seed; adopt crop rotation; destroy plant residues; spray Dithane M-45 @ 0.2% three times at 10-day intervals starting 30 days after germination.
Harvesting
Fodder quality depends on the stage of harvest. As the crop matures, leaf-to-stem ratio decreases and lignification increases. In multi-cut varieties, the first cut is taken 55–60 days after sowing, followed by cuts at 35–45 day intervals, resulting in higher green fodder and dry matter yield. For good regeneration, cut multi-cut sorghum 5–8 cm above ground level. If sowing is done during mid-March to early April, average green fodder yield from 3–4 cuts of multi-cut varieties/hybrids can be 60–90 t/ha.
Special Note:
The above information is based on our trials; results may vary depending on soil, climate conditions, rainfall, temperature, sowing temperature, sowing time, and cultivation practices.
Fertilizer dosage should be applied only after soil testing.
For technical information on crop production, please contact the District KVK / nearest KVK.
जलवायु
खरीफ में फसल वृद्धि हेतु सापेक्ष आर्द्रता 80-85% तथा औसत वर्षा 500- 750 मिमी उपयुक्त है; खरीफ में अच्छी वृद्धि के लिए इष्टतम आदर्श तापमान 33-34° सेल्सियस है। जबकि रबी के दौरान 24-25° सेल्सियस से ज्याद तापमान उपयुक्त होता है। अच्छे अंकु रण के लिए मृदा का इष्टतम तापमान 18-21° सेल्सियस होता है।
मृदा
समतल तथा अच्छे जल निकास वाली भूमि को प्राथमिकता दी जाती है। अच्छे जल निकास वाली दोमट, बलुई दोमट, हल्की व औसत काली मिट्टी उपयुक्त होती है तथा पौधो की अच्छी वृद्धि हेतु 6.5 से 7.5 पीएच म ं ान उपयुक्त होता है।
खेत की तैयारी व बुआई
एक ग्रीष्मकालीन जुताई के बाद 2-3 हैरो और पाटा लगाने से भूमि को ख़स्ता तथा पुंज-मुक्त (क्लम फ्रि) बनाने की आवश्यकता होती है।
बुआई का समय
बुआई का समय मृदा तापमान, मौसम के मापदंडो व फसल ं कटाई की योजना आदि पर निर्भर होता है। यद्यपि, गर्मियो हेतु 20 म र्च से 10 अप्रैल सबसे अच्छी अवधि है तथा मानसून के लिए पहली वर्षा में बुआई की जानी चाहिए। बहुकट किस्मों/सं करो िस्मों की बुआई अ ं प्रैल के प्रथम पखवाड़े में कर देनी चाहिए। भूमि तथा सिचं ाई की उपलब्धता के आधार पर बुआई का समय मई के पहले सप्ताह तक बढ़ाया जा सकता है। बहु-कट किस्मों/सं करो िस्मों को ग् ं रीष्मकालीन फसल के रूप में सिचं ई के अंतर्गत बोया जा सकता है।
बीज दर एवं बीज उपचार
बहु-कट चारा ज्वार : बीज दर 10 किग्रा/हेक्टेयर है, पंक्तियो के बीच 45 ं सेमी की दूरी, आवश्यकतानुसार सिचं ाई अथवा गर्मी के मौसम में 7 से 10 दिनो के अंतर ं ाल पर सिचं ाई।
बुआई की विधि
बीज को उचित अंकु रण के लिए पंक्तियो में 25-30 सेंमी की द ं ूरी पर 2.5-4.0 सेंमी की गहराई में बोना चाहिए। समय से खेत तैयार न होने की स्थिति में बीज दर 15-20 प्रतिशत ज्यादा करके छिडकवां पद्धति से बुआई करनी चाहिए।
उर्वरक तथा पोषक तत्व प्रबंधन
ज्वार धान्य व उच्च जैवभार फसल होने के कारण उच्च पैदावार के लिए सं तुलित उर्वरक की आवश्यकता होती है।बहु-कट किस्मों में, तीन भ गो में 100-120 क ं िग्रा नाइट्रोजन/ हेक्टेयर की सिफारिश की जाती है। पहला एक तिहाई भाग बुआई के समय देना चाहिए। दूसरा एक तिहाई भाग पहली कटाई के बाद तथा शेष एक तिहाई भाग दूसरी कटाई के बाद दिया जाता है। ये तीनो भं ाग मृदा में पर्याप्त नमी के दौरान दिए जाने चाहिए। खराब हल्की मृदा में बुआई से पहले 8-10 टन/हेक्टेयर कू डा खाद या गोबर खाद डालना आवश्यक है।बहु-कट ज्वार में बुआई से पहले 10-15 टन/हेक्टेयर कू डा खाद/गोबर खाद तथा प्रत्येक कटाई के बाद (अंतिम कटाई को छोड़कर) 40-45 किग्रा नाइट्रोजन/हेक्टेयर) समान भागो में ं प्रयोग करें।
जल प्रबंधन
सामान्यतः वर्षा ऋतु में बोई जाने वाली ज्वार फसल को सिचं ाई की आवश्यकता नही होती है। लंबे समय तक सूखे के दौर ं ान अथवा आवश्यकता पड़ने पर 15-20 दिनो के अंतर ं ाल पर एक या दो सिचं ाई दी जा सकती है। जलभराव से बचना चाहिए। मार्च या अप्रैल में बोई जाने वाली फसल में पहली सिचं ाई बुआई के 15-20 दिन बाद, तत्पश्चात 10-15 दिन के अंतराल पर सिचं ाई की आवश्यकता होती है। बहु-कट किस्मों में, बेहतर िस्मों पुनर्जनन व तेजी से विकास हेतु फसल को प्रत्येक कटाई के तुरंत बाद सिचं ाई दी जानी चाहिए।
खरपतवार प्रबंधन
बुआई के 25-30 दिन तक खेत को खरपतवार मुक्त रखना चाहिए। मोथा (साइपरस रोटंडस), दूब (सिनोडोन डेक्टाइलोन) तथा अन्य चौड़ी पत्ती वाले खरपतवार सामान्य खरपतवार हैं। फसल वृद्धि की प्रारंभिक अवस्थाओ में खरपतव ं ार एक बड़ी समस्या है तथा पानी व पोषक तत्वों के ्वों लिए प्रतिस्पर्धा करते हैं। अच्छी तरह से तैयार भूमि, इष्टतम बीज दर तथा अच्छा अंकु रण सामान्यतया प्रारंभिक अवस्था में खरपतवारो को उभरने ं नही देत ं ा, तत्पश्चात फसल वितान (कै नोपी) के कारण खरपतवारो जी ं वित नही रह प ं ाते हैं। खेत को खरपतवार मुक्त रखने के लिए ग्रीष्मकालीन जुताई तथा बुआई के 15-20 दिन बाद 1-2 हस्त निराई करने से खरपतवार काफी कम हो जाते हैं। अंकु रण के पहले एट्राज़ीन 0.5 किग्रा सक्रिय तत्व/ हेक्टेयर की दर से छिड़काव खरपतवारो कं ा प्रभावी नियंत्रण करता है। बुआई के 48 घं टे के तुरंत बाद खरपतवारनाशी का छिड़काव करना चाहिए और यह सुनिश्चित करने की आवश्यकता है कि मृदा की सतह नम हो। एकीकृ त खरपतवार प्रबं धन के लिए, गर्मियो की जुत ं ाई, अच्छी तरह से तैयार भूमि, 1-2 निराई तथा अच्छे अंकु रण प्रतिशत वाले बीजो के स ं ाथ इष्टतम बीज दर का उपयोग आवश्यक है
कीट-पीडक व रोग एवं उनका प्रबंधन
पर्णीय छिड़काव व प्रणालीगत रसायनो से बचन ं ा चाहिए, क्योंक्योंि फू ल आने या काटने की अवस्था में पूरा पौधा मवेशियो कं ा आहार होता है। कीटपीड़क तथा रोगो के लक्षण व ं नियंत्रण के उपाय निम्नलिखित ह
कीट-पीडक प्ररोह मक्खी (शूट फ्लाई) लक्षण : यह पौद अवस्था में होता है, केंद्रीय पत्ती का मुरझाना व सूखना, पुष्पवृंत में सुरंग, विशिष्ट 'मृत केंद्र' के रूप में दिखाई देता है, क्षतिग्रस्त पौधे पार् कल्श्व ले पैदा करते हैं तथा संक्रमण बढ़ाते हैं।
नियंत्रण के उपाय : सितंबर के अंत से अक्तूबर के पहलेसप्ताह में बुआई, 12.5 लाख हेक्टेयर-1 की दर से परजीवी ट्राइकोग्रामा चिलोनिस इशी के अंडे छोडना।
तना बेधक (स्टेम बोरर) लक्षण : अंकु रण के दूसरे सप्ताहके पश्चात फसल पर आक्रमण, पत्तियो पर ं अनियमित आकार के छेद, बाह्यत्वचा को खाने के कारण सुराख व खरोचो ं ं का मिश्रण दिखाई देता है, कभी-कभी युवा पौधो में 'मृत कें ं द्र' लक्षण भी दिखाई देते हैं।
नियंत्रण के उपाय : डंठलो को जड़ से उख ं ाड़कर जला दें तथा संक्रमण को एक फसल से दूसरी फसल में जाने से रोकने हेतु तनो/डंठलो ं को हट ं ा दें।
फॉल सैनिक कीट (फाल आर्मी वार्म) लक्षण : पहले व दूसरे इंस्टार डिभक प ं त्तियो की ऊपरी ब ं ाह्यत्वचा को कु रेदकर कं कालनुमा बना देते हैं, 3रे इंस्टार वलयो पर कु रेदकर क ं िनारे वाले छेद बनाते हैं, 5वें इंस्टार डिभक प्रत् ं येक वलय में 1-2 डिभक के स ं ाथ तेजी से खाना शुरू करते हैं। नियंत्रण के उपाय : बुआई से पूर्व गहरी जुताई से डिभक व प् ं पयूा सूरज की रोशनी तथा प्राकृ तिक शत्ओरु के सं प ं र्क में आ जाते हैं, अंडो/लं ार्वा को एकत्र करके नष्ट कर दें, बुआई के बाद 12 टप/ हेक् ्रै टेयर की दर से फे रोमोन टप लग ्रै ाएं , 25/हेक्टेयर की दर से पक्षियो के बसेरे तैय ं ार कर दें। रोग पुष्पगुच्छ रोग (पेनिकल डिजिज) दाना फफूंद/काला दाना (ग्रेन मोल्ड) लक्षण : संक्रमित दानो की सतह पर गुल ं ाबी, सफे द, धूसर या काले रंग की फफूं द विकसित हो जाती है। नियंत्रण के उपाय : उच्च वर्षा में परिपक्वन की सं भावना वाली कृ ष्य किस्मों की खेती से बचें। परिपक्वता के तुरंत बाद पुष्पगुच्छों की कट च्छों ाई कर लें। कवकनाशी प्रोपिकोनाज़ोल 0.2% सक्रिय तत्व या जैव-कारक ट्राइकोडर्मा हार्ज़ियानम लिक ब्रोथ 10 मिली/लीटर पानी की दर से पुष्पगुच्छों पर च्छों छिड़काव फफूं द के प्रकोप को कम करता है और स्वच्छ अनाज प्रदान करता है।
अरगट/शर्करा रोग (शुगरी डिजिज) लक्षण : फू लो से च पचिपे द्रव की बूं दे निकलती है।
नियंत्रण के उपाय : बीज उत्पादन भूखं डो में पुष्पन (ए व आर वंश ं क्रम) की समकालिकता सुनिश्चित करना। अगेती बुआई, खेत की मेड़ से सं पार्श्विक परपोषी को हटाना। बीजो से स् क्लेरोशिया को यात्रिं क रूप से हटाना।
पर्ण रोग श्यामवर्ण (ऐन्थ्रक्नोज) लक्षण : पत्रदल, मध्य-शीरा तथा डंठल पर काले बिदं ओु के स ं ाथ छोटे, भूरे से गहरे भूरे गोलाकार से लेकर लंबे घाव के धब्बेदिखाई देते हैं।
नियंत्रण के उपाय : स्वच्छ बीज का उपयोग, पौधो के अप ं शिष्ट को नष्ट करना, फसल चक्रण, सूडान घास, जॉनसन घास जैसे परपोषी खरपतवार को हटाना।
मृदरुोमिल आसिता (डाउनी मिल्ड्) यू लक्षण : पत्तियो पर चमकीली हरी और सफे द ध ं ारियो कं ा दिखना और निषिक्तांड (ओस्पोर्स) के सफे द धब्बे। पूरी पत्तियाँ हरिमाहीन हो सकती हैं तथा पौधो पर ं प्रायः पुष्पगुच्छ नहींनिकल पाते हैं।
नियंत्रण के उपाय : निषिक्तांड को नष्ट करने के लिए रोपण से पहले गहरी जुताई करें। संक्रमित पौधो को उख ं ाड़कर जला देना चाहिए। फसल चक्रण अपनाएं , मेटालेक्सिल/रिडोमिल 25 के साथ 1 ग्राम सक्रिय तत्व/किग्रा बीज से बीज धावन करना चाहिए। किट्ट (रस्ट) लक्षण : पत्ती पर दानेनुमा उभार के फटने से लाल से भूरे रंग के पाउडर जैसा पदार्थ निकलता है। नियंत्रण के उपाय : स्वच्छ बीज का प्रयोग करें, फसल चक्रण अपनाएं , पौधो के अप ं शिष्ट को नष्ट करें, अंकु रण के 30 दिनो बं ाद प्रत्येक 10 दिनों के अंतराल पर तीन बार डाइथेन एम 45 0.2% का छिड़काव करें।
फसल कटाई
चारे की गुणता, फसल कटाई की अवस्था पर निर्भर करती है। जैसे-जैसे फसल परिपक्व होती है, पत्ती/तना अनुपात में कमी आती है एवं चारा के लिग्निफिके शन में वृद्धि होती बहु-कट किस्मों में, पहली कट िस्मों ाई बुआई के 55-60 दिनो के ब ं ाद की जाती है तत्पश्चात 35-45 दिनो के अंतर ं ाल पर कटाई की जाती है, जिससे हरे चारे की उपज तथा शुष्क पदार्थ का उत्पादन ज्यादा होता है। कटाई के बाद अच्छे पुनर्जनन के लिए बहु-कट ज्वार की कटाई जमीनी स्तर से 5-8 सेमी ऊपर की जानी चाहिए। चारे की उपज यदि बुआई मार्च (मध्य) - अप्रैल (पहला सप्ताह) के दौरान की जाती है तो औसतन, जबकि बहु-कट किस्मों/सं करो िस्मों की 3-4 कट ं ाई में हरे चारे की उपज 60-90 टन/हेक्टेयर हो सकती है।
Special Note: Above given information is based on our trails , result may vary depending on soil, climate condition, rainfall, temperature, sowing temperature, sowing time, cultivation practices etc.
Fertilizer dosage should be done only after soil test.
For technical information of crop production please contact to district KVK/ nearest KVK.